ANEXE

 

Participări la granturi de cercetare:

  1. 2007-2009 – cercetător în grantul “Image-Guided Transbronchial Biopsy with Novel Biopsy Device”, în colaborare cu ISIS Center, Georgetown University, Washington, SUA, finanţat de TATRC BAA, SUA.

 

  1. 2007-2009 – director al grantului “Perfecţionarea artroplastiei de revizie a articulaţiei şoldului în urma evaluării biomecanice utilizând modele computaţionale parametrizate, adaptabile la pacient”, finanţat de CNCSIS, nr. Contract 29C/08.05.2007 (fonduri: 54500,80000).

 

  1. 2006-2008 - responsabil ştiinţific pentru Universitatea din Craiova in cadrul proiectului CEEX "Îmbunătăţirea pe termen lung a calităţii vieţii pacienţilor cu artroplastii, prin creşterea duratei de funcţionalitate a endoprotezelor", finantat de Ministerul Educatiei si Cercetarii, nr. contract 131/2006 (fonduri: 41500, 200000, 235050).

 

  1. 2006-2008 - responsabil ştiinţific pentru Universitatea din Craiova in cadrul proiectului CEEX "Managementul individualizat al  recuperarii mobilitatii  pacientilor cu patologie neurologica  si ortopedica prin prisma unor metodologii de cercetare interdisciplinare", finantat de Ministerul Educatiei si Cercetarii, nr. contract 107/2006 (fonduri UCV: 35000, 334000, 266600).

 

  1. 2004–2006 - director al grantului „Metoda computationala pentru evaluarea capacitatii hemodinamice si de distributie a oxigenului in retelele microvasculare construite pentru ingineria tesuturilor", finanţat de Academia Română, Contract nr 125/2.09.2005 (fonduri: 2000, 3000).

 

  1. 2004 - 2006  - director al grantului „Studii prin metoda elementelor finite privind influenţa formei şi a materialului asupra performaţelor în utilizare a endoprotezele de genunchi”, finanţat de CNCSIS, Contract nr. 27661/14.03.2005 (fonduri: 7000,6000).

 

  1. 2002-2004 -  director al grantului „Model biomecanic virtual pentru investigarea, studiul cinematic şi optimizarea protezelor utilizate în corectarea deficienţelor locomotorii”, finanţat de CNCSIS, nr. contract 33547-2003, cod 298 AT (fonduri: 2700, 4500) .

 

  1. 2006-2007 – cercetator in cadrul grantului „Periscopic Spine Surgery”, Georgetown University, Washington, SUA, Nr Grant: DAMD17-99-1-9022 finantat de U.S. Army

 

  1. 2005 – cercetator in cadrul grantului de cercetare CEEX „Materiale nanostructurate biocompatibile pentru dispozitive medicale”, finantat de Ministerul Educatiei si Cercetarii, nr. contract 40/2005,

 

  1. 2005 – cercetator, program de cercetare INVENT, beneficiar: INMA; coordonator: I.C.P.E. – C.A., Bucuresti; titlu: „Materiale magnetice cu stabilitate termica ridicata” acronim: MAGSTAB; durata finantarii: 2005-2006.

 

  1. 2001-2002 - cercetător în cadrul grantului "High-Fidelity Synthetic Human Torso for Training and Evaluation of Urologic Laparoscopic Skills", Johns Hopkins University, USA, finanţat de "American Foundation for Urologic Disease", SUA, Nr. grant: PHD0103.

 

  1. 2002- cercetător în cadrul grantului "Multi-Imager Compatible Robot for Precise Prostate Access", Johns Hopkins University, USA, finanţat de National Institute of Health – National Cancer Institute, SUA Nr. grant 1R21CA088232-01A1.

 

 

 

Cărţi:

  1. Gruionu, L.G., C. Bratianu, P. Rinderu, „Modelarea si simulare numerica in biomecanica” Editura Universitaria Craiova, 2005, ISBN: 973-8043-97-8.
  2. C. Mercut, E.T. Avramescu, D. Niculescu, L.G. Gruionu, R. Melinte, “Contribuţii la analiza distribuţiei tensiunilor mecanice în zona de osteosinteză a fracturilor humerusului proximal”, Editura Universitaria Craiova, 2007, ISBN: 978-973-742-758-8 (în tipografie).
  3. Mercut, G., E.T. Rinderu, L.G. Gruionu, „Aspecte clinico-ultrasonografice şi modelare computaţională în glaucomul cu unghi deschis”, Editura Universitaria, Craiova 2005, ISBN 973-742-022-5.
  4. Rinderu, P., L. G. Gruionu, Metode Numerice - Elemente teoretice si aplicative. 2003, Craiova, Romania: Universitaria. ISBN: 973-8043-332-2.
  5. L.G. Gruionu, N. Iliescu, C. Constantinescu, V Georgeanu, T Atasiei - Editor: S.D. Pastrama "Biomecanica artroplastiilor de genunchi si sold", 2008, 216p, Editura Printech, ISBN: 976-606-521-090-5.

 

           

Articole Stiintifice in Jurnale Internationale, Conferinte Internationale si Nationale.:

1.     Gruionu L.G., Avramaescu E.T., Ilinca I., Zavaleanu M., Rosulescu E., "Using modeling methods to study injury mechanism of the lower limbs during volleyball spike movement for female players", 16th European Congress of Physical and Rehabilitation Medicine, Journal of Rehabilitation Medicine, Supp. No. 47, p206, 2008.

2.     Avramescu T.E., Gruionu L.G., Ilinca I, Zavaleanu M., Rosulescu E., "A biomechanical virtual model of the shoulder used to study injuries during volleyball spike movement", 16th European Congress of Physical and Rehabilitation Medicine, Journal of Rehabilitation Medicine, Supp. No. 47, p206, 2008.

3.     Rosulescu E., Zavaleanu M, Avramescu T., Danoiu S., Gruionu L, Dragomir M, "Effects of muscles strengthening and electrical stimulation on lower limb kinematics in children with paraplegic cerebral palsy", 16th European Congress of Physical and Rehabilitation Medicine, Journal of Rehabilitation Medicine, Supp. No. 47, p187, 2008.

4.     Avramescu E.T., Ilinca I., Gruionu L.G., C. Neamtu, "Image acquisition and movement analysis - a protocol aiming to decrease trauma incidence in high level volleyball", Archivos de medicina del deporte, Vol. XX(6), p516, 2008.

5.     Ilinca I, Avramescu E.T., Gruionu L.G., C. Neamtu, "Elaboration of a tridimensional musculoskeletal model based on strike attack biomechanical analysis in volleyball", ", Archivos de medicina del deporte, Vol. XX(6), p516, 2008.

6.     Gruionu L.G., Iliescu N., Pastrama S., "Bone ingrowth simulation around tibia prosthetic component", International Congress of the Polish Society of Biomechanics 2008, Wroclaw, Poland.

7.     Iliescu N., Pastrama S., Nastasescu V., Gruionu L.G. "On the change of the maximum pressure area at the interface cup – femoral piece due to aseptic decementation of the cotyloid part", International Congress of the Polish Society of Biomechanics 2008, Wroclaw, Poland.

8.     Iliescu N., Pastrama S., Gruionu L.G., Jiga G., "Photoelastic studies concerning the Biomechanical changes of the hip joint following different corective osteothomies", International Congress of the Polish Society of Biomechanics 2008, Wroclaw, Poland.

9.     V. Georgeanu, V. Predescu, T. Atasiei, I. Gandea, S. Cristea, L. G. Gruionu, „Studiul remanierii osoase periprotetice in artroplastia totala de genunchi prin metoda elementelor finite”, Al XIII-lea Congres Naţional SOROT - Conferinta Nationala de Ortopedie, 2008, Baile Felix, Romania.

10.  L. G. Gruionu, V Predescu, N. Iliescu, S. Pastrama, P. Rinderu, G. Gruionu, "Biomechanical Behavior of the Revision Hip Asthroplasty during normal walking", Proceedings of the Biomedical Engineering Society Conference, St. Louis, USA, 2008.

11.  Gruionu L.G., F. Manstad-Hulaas, E. Wilson, P. Cheng, T. Popa, J. Lee, F. Banovac, K. Cleary, “Design, construction and evaluation of an electromagnetically tracked quidewire for interventional radiology and surgical applications”, 22nd  International Congress of Computer Assisted Radiology and Surgery, Barcelona, Spain, 2008.

12.  N. Iliescu, L. G. Gruionu, S. D. Pastrama, ”Cercetari numerice si experimentale privind comportamentul biomecanic al protezelor de sold si genunchi”, Simpozion National de Cercetare Stiintifica Medicala de Excelenta 25-26 octombrie 2007 Sibiu, Editura Universitara „Carol Davila”, Bucuresti, 2007, ISBN: 978-973-708-272-5

13.  V. Georgeanu, V. Predescu, T. Atasiei, I. Gandea, S. Cristea, L. G. Gruionu, „Corelaţia dintre malpoziţia componentei tibiale in plan frontal şi durata de supravieţuire a artroplastiei totale de genunchi”, Al XII-lea Congres Naţional SOROT - Conferinta Nationala de Ortopedie 2007, Târgu Mureş, Romania.

14.  V. Geogeanu, L. G. Gruionu, V. Predescu, T. Atasiei, „Studiul corelaţiei între cinematica protezei totale de genunchi şi uzura polietilenei prin metoda elementelor finite”, Conferinţa “Zilele Spitalului Clinic de Recuperare Iaşi” – ediţia a V-a, Iasi, Romania, 2007.

15.  V. Predescu, L. G. Gruionu, V. Georgeanu, St. Cristea, I. Dinulescu, „Folosirea metodelor computaţionale cu elemente finite în compararea tehnicilor de reconstrucţie acetabulară în revizia protezei de şold”, Conferinţa “Zilele Spitalului Clinic de Recuperare Iaşi” – ediţia a V-a, Iasi, Romania, 2007.

16.  L. G. Gruionu, N. Iliescu, V. Predescu, „Three-dimensional dynamic simulation of total hip replacement behavior during a step-up task”, 24th Danubia-Adria International Symposium, Sibiu, Romania, 2007.

17.  L. G. Gruionu, S. Pastrama, V. Georgeanu, P. Rinderu, „Numerical modeling and simulation of mechanical phenomena in total knee arthroplasty during walking”, 24th Danubia-Adria International Symposium, Sibiu, Romania, 2007.

18.  L. G. Gruionu, N. Iliescu, Ş. D. Pastramă, „Experimental investigations concerning the biomechanical behavior of the knee joint in some pathological cases”, 24th Danubia-Adria International Symposium, Sibiu, Romania, 2007.

19.  Gruionu L.G., Emmanuel Wilson, Irving N. Weinberg, Kevin Cleary, Kenneth H. Wong, “Tracking accuracy evaluation of a PET-enabled glove for molecular image-guided surgery”, 21st  International Congress of Computer Assisted Radiology and Surgery, Berlin, Germany, 2007.

20.  Jae Choy, L.G. Gruionu, Teo Popa, Eric Anderson, Irving Weinberg, Kevin Cleary, “Transbronchial biopsy assisted by Electromagnetically-tracked biopsy forceps”, 21st  International Congress of Computer Assisted Radiology and Surgery, Berlin, Germany, 2007.

21.  Weinberg Irving, Cheng Patrick, Wong Kenneth H., Cleary Kevin, Abshire Pamela, Saveliev Valeri, Dandin Marc P., Gruionu, L.G., “PET-Enabled Glove for Molecular Image-Guided Surgery”, Journal of Nuclear Medicine, v48, S2, 163P, 2007 (cotat ISI, IF: 4.986, ISSN: 0161-5505).

22.  Gruionu, L.G., Predescu, V., Avramescu, T.,  Cristea, S., Dinulescu, I. “Finite element analysis of the revision hip arthroplasty with allograft and restoration GAP acetabular cup”, 8th Congress of European Federation of National Associations of Orthopaedics and Traumatology, Florenţa, Italia, 2007.

23.  Predescu, V., Gruionu, L. G., Cristea, S.; Dinulescu, I., “The comparison between two revision hip arthroplasty procedures using computational methods”, 8th Congress of European Federation of National Associations of Orthopaedics and Traumatology, Florenţa, Italia, 2007.

24.  Georgeanu, V. A., Gruionu, L.G., Predescu, V., Atasiei, T., Cristea, S., „The study of correlation between joint kinematics and poliethylene wear using finite elements method for total knee replacement”, 8th Congress of European Federation of National Associations of Orthopaedics and Traumatology, Florenţa, Italia, 2007.

25.  Georgeanu V., L.G. Gruionu, „Correlation between joint kinematics and polyethylene wear using finite elements method for total knee replacement”, Maedica – a Journal of Clinical Medicine, vol. 1(4), pag. 38-42, 2007, ISSN: 1841-9038.

26.  Kenneth H. Wong, Lucian G. Gruionu, Patrick Cheng, Stephen Adler, Pamela Abshire, Valeri Saveliev, Seong K. Mun, Kevin Cleary, Irving N. Weinberg, ” PETglove, a new technology for portable molecular imaging”, Proceedings of Medical Imaging 2007 Conference: Visualization and Image-Guided Procedures, San Diego, California, USA.

27.  Gruionu, L.G., Rinderu, P.L., “Knee Biomechanics - Past, Present and Future”, ICB 90 Lecture Series, Polish Academy of Sciences, 2006.

28.  Gruionu, L. G., Rinderu, P. L., "Numerical simulation of bone ingrowth after total knee arthroplasty". 5th World Congress of Biomechanics, Munich, Journal of Biomechanics, v39, s1, p412, 2006.(IF 2.364) ISSN: 0021-9290.

29.  Mazilu, D., A. Patriciu, L.G. Gruionu, A. Ong, L. Ellison, D. Frimberger, O. Fugita, L. Kavoussi, D. Stoianovici, A Synthetic Torso for Training and Evaluation of Urologic Laparoscopic Skills. Journal of Endourology, v20, nr. 5, pg. 340-345, 2006. (IF 1.035) ISSN 0892-7790.

30.  L.G. Gruionu, C. Bratianu, „A constitutive model of the human ligament for finite elements simulation”, Journal of Endourology, v19, nr. 7, pg. 922-923, 2005. (IF 1.035) ISSN 0892-7790, (indexat ISI şi Pubmed/Medline).

31.  Mercut G, Rinderu E.T, Andritoiu AC, Gruionu L.G., „Pressure stress in glaucoma--assessment through classical techniques and computational modelling”, Oftalmologia, vol 49(2), pag. 66-74, 2005 ISSN: 1220-0875. (indexat în PubMed/Medline)

32.  Gruionu, L.G., Rinderu P.L., Gruionu G., “A computational study of the tibial component biomechanical behavior in total knee arthroplasty”, Proceedings of the Biomedical Engineering Society Conference, Baltimore, USA, 2005.

33.  Ciolacu F., Craciunoiu, N., Gruionu L.G. “Drilling forces measuring using a strain gages based dynamometer”, Proceedings Euro PM Conference , Praga, 2005.

34.  Rinderu, P., L.G. Gruionu, C. Mercut, C. Berceanu, 2D analysis of the humerus diaphysis-metaphisys fractures. Review of industrial engineering, 2005. 1(1): p. 53-57.

35.  Gruionu, G., J.B. Hoying, L.G. Gruionu, M.H. Laughlin, T.W. Secomb, Structural adaptation increases predicted perfusion capacity following vessel obstruction in the arteriolar arcade network of pig skeletal muscle. American Journal of Physiology: Heart and Circulatory Physiology, vol 288 (6): H2778-H2784, 2005 ISSN:0363-6135. (indexat în ISI şi PubMed/Medline, factor impact 3.560)

36.  Bratianu, C., L.G. Gruionu. Computational simulation of a total knee prosthesis mechanical behavior. Key Engineering Materials, vol. 306-308, pag. 1265-1270, Part 1-2, 2006 ISSN: 1013-9826, (indexat în ISI, factor impact 0.497)

37.  M. Mangra, O. Gingu, G. Sima, N. Dumitru, L.G. Gruionu, N. Coman, „Contributions to metallic matrix composites processing by powder metallurgy”, NANOMAT, Iasi,2005.

38.  Mangra M., Ciolacu, F., Dumitru, N., Ciupitu, I., Craciunoiu, N., Gingu, O. Gheorghe, St. Benga, G., Teisanu, C., Gruionu, L.G., Savu, D., Sima, G., Coman, D. “Orientari si tendinte in elaborarea prin metalurgia pulberilor si analiza materialelor avansate”, A 4-a editie a Seminarului National de nanostiinta si nanotehnologie, Academia Romana, 2005.

39.  Rinderu, P., C. Bratianu, L.G. Gruionu. A 3D finite element model of the cruciate ligaments in normal and special solicitations. in The 14-th Conference of the European Society of Biomechanics. 2004. Hertogenbosch, Netherlands.

40.  Gruionu, L.G., C. Mercut, P. Rinderu, C. Berceaunu. 3D Finite element analysis of diaphysis-metaphisys humerus fractures. in The 14-th Conference of the European Society of Biomechanics. 2004. Hertogenbosch, Netherlands.

41.  Bratianu, C., P. Rinderu, L.G. Gruionu. A 3D Finite Element Model of a Knee for Joint Contact Stress Analysis during Sport during Sport Activities. Key Engineering Materials, vol. 261-263, pag. 513-517, 2004, ISSN: 1013-9826, (indexat în ISI, factor impact 0.497).

42.  Bratianu, C., L.G. Gruionu, P. Rinderu. Modelarea si simularea numerica a contactului suprafetelor articulatiei tibio-femurale. in Proceedings of The 7-th International Conference on Mecatronics and Precision Engineering. 2004. Bucuresti, ISBN: 973-86886-1-2.

43.  Bratianu, C., L.G. Gruionu. A Knee 3D computational model for stress analysis. in Performance Based Engineering for 21 Century. 2004. Iasi, ISBN: 973-667-063-5.

44.  Rinderu, P., E.T. Rinderu, L.G. Gruionu, C. Bratianu, A FEM study of aortic hemodynamics in the case of stenosis. Acta of Bioengineering and Biomechanics, 2003. 5(2): p. 45-52 ISSN: 1509-409X, (indexat EMBASE, Elsevier).

45.  Mocanu, M., A. Patriciu, D. Stoianovici, D. Mazilu, D. Lindisch, G. Corral, L.G. Gruionu, K. Cleary. Fluoroscopy Servoing using Translation/Rotation Decoupling in an A/P View. in Proceedings of Medical Imaging 2003 Conference: Visualization and Image-Guided Procedures, San Diego, California, USA.

46.  Mazilu, D., L.G. Gruionu, O. Fugita, L. Ellison, P. Pinto, A. Patriciu, L. Kavoussi, D. Stoianovici. Synthetic-Animal Model for Urologic Laparoscopy Training. in 18-th Annual Meeting of Engineering & Urology Society. 2003. Chicago, USA.

47.  Gruionu, G., J.B. Hoying, M.H. Laughlin, G.M. Constantinescu, L.G. Gruionu, T.W. Secomb, Simulation of blood flow and structural adaptation in arteriolar arcade network of miniature swine triceps muscle:  Maintenance of perfusion following partial removal of blood supply. FASEB Journal, 2003. 17(4): p. A551 ISSN: 0892-6638, (indexat ISI).

48.  Rinderu E.T., Gruionu L.G., Rinderu P.L., Bratianu C., „A Finite Element Model Of The Cruciate Ligaments”, European Congress Of Sports Medicine, Hasselt, Belgium, 2003.

49.  Rinderu, P., L.G. Gruionu, C. Bratianu, T. Rinderu. A FEM study of aortic hemodynamics in the case of stenosis. in 13th Conference of the European Society of Biomechanics. 2002. Wroclaw, Poland.

50.  Dragoi, G., R. Melinte, S. Dragoi, L.G. Gruionu, M. Niculescu, M. Stanescu, R. Nemes, T. Rinderu, Contributii la modelarea structurii osului intr-un spatiu topologic.  Implicatii in patologia medico-legala. Romanian Journal of Anatomy, 2002. 4(1): p. 34-49.

51.  Rinderu, P., T. Rinderu, L.G. Gruionu. A finite element model for analyzing the compact bone microfractures. in II Congress of European Federation of Sports Medicine, IX Congreso Nacional de la Federacion Espanola de Medicina Deportiva. 2001. Oviedo, Spain: Archivos de Medicina del Deporte.

52.  Rinderu, P., G. Dragoi, L.G. Gruionu, T. Rinderu. A finite element model for analyzing the bone microfractures (static and dynamic approaches). in The 17th International Symposium on Sports Medicine. 2001. Ierusalem, Israel.

53.  Gruionu, L.G., T. Rinderu, P. Rinderu. A finite element model for analyzing the compact bone structure. in II Congress of European Federation of Sports Medicine, IX Congreso Nacional de la Federacion Espanola de Medicina Deportiva. 2001. Oviedo, Spain: Archivos de Medicina del Deporte.

54.  Rinderu, T., L.G. Gruionu. Finite element model for hemodynamics and arterial wall mechanics. in XX Congres International de Medicine du Sport. 2000. Paris, France: Elsevier.

55.  Rinderu, P., L.G. Gruionu, O analiza cu metoda elementului finit a unor vase compromise anatomic. Analele Universitatii din Craiova, 2000(Mecanica).

56.  Rinderu, P. L.G. Gruionu, Analiza cu metoda elementului finit a unui arbore arterial. Analele Universitatii din Craiova, 2000(Mecanica).

57.  Gruionu, L.G.,  E. Rinderu. Computational blood flow modeling of human abdominal aorta with mild stenosis. in XX Congres International de Medicine du Sport. 2000. Paris, France: Elsevier.

58.  Gruionu, L.G.,  D. Mazilu. Prelucrarea rotilor dintate conice cu dinti curbi pe masini Saratov. in A III-a Conferinta Nationala de Tehnologii Moderne de Prelucrare. 1995. Craiova, Romania: Universitatea din Craiova.

 

 

 

Alte activitati si specializari:

-       Fondator si Director din 2005 al grupului „Computational Biomechanics Group” din cadrul Universităţii din Craiova, cu activitate de cercetare in domeniul proiectarii mecanice si metodelor numerice aplicate in bioinginerie (www.imst.ro/cbg).       

-       Membru al Societatii Europene de Biomecanica din 2006.

-       Evaluator CNCSIS din anul 2004.

-       Martie-Mai 1997 - specializare in Coreea de Sud in domeniul proiectarii asistate de calculator la Centrul Tehnic Daewoo din Seul.

-       2005-2006 – Consultant pe probleme de proiectare asistată de calculator pentru firma romano-americană Cambric S.A.