ANNEXES

 

National research activity

 

·          Research grant EXCELENCE RESEARCH (CEEX), code 1592, beneficiary: Ministry of Education and Research, coordinator: University of Craiova, Faculty of Engineering and Management of Technological Systems from Drobeta Turnu Severin, title: Developing of knowledge concerning nanostructurated materials elaborated and microprocessed by Powder Metallurgy for M.E.M.S. components,  acronym: PRONANOMAT, funding course: 2006-2008;

·          Research grant EXCELENCE RESEARCH (CEEX) code 2013 beneficiary ISIM Timisoara, title: Plurifunctionalizated microstructures for  Ti alloy coated by advances technology, acronym MICROFUNCTIA, funding course: 2006-2008;

·          Research grant, code 108/2005, beneficiary National University Research Center N.U.R.C. (C.N.C.S.I.S.); project coordinator: prof. Mangra Mihail; title: Research on sintered carbon steels processing from mixtures with Fe powders and Fe3C nanopowder particles, 2005;

·          Research grant no.  544/1999 (34) beneficiary National University Research Center N.U.R.C. (C.N.C.S.I.S.), project coordinator prof. dr. ing. Mangra Mihail, title: Research on processing metallic and ceramic  magnetic materials for building machines construction and electro technial industries, 1999                .

·          Research grant EXCELENCE RESEARCH (CEEX) no. 94/2006, beneficiary:  Ministry of Education and Research; coordinator: Institute of Chemics-Physics „I.G. Murgulescu”, Bucharest, Romania; partner: University of Craiova, Faculty of Engineering and Management of Technological Systems, Drobeta Turnu Severin; partnership coordinator: prof. Mihail  Mangra; title : The influence of the composition and the structure on the thermodynamical, electrical and magnetic properties of the micro- and nanostructured oxidic materials with special magnetorezistive properties; acronym : CMR-TEM ; funding course : 2006-2008

·          Research grant EXCELENCE RESEARCH (CEEX) nr.265/2006, beneficiary :  Romanian Ministry of Education and Research; coordinator : Institute of Welding and Materials Testing (ISIM), Timisoara; partnership: University of Craiova, Faculty of Engineering and Management of Technological Systems from Drobeta Turnu Severin; partnership coordination: prof. Mangra M.; title : Virtual centre for integrated technologies with applications in the electroultra-acustic energy in advanced materials engineering; acronym : ULTRATECH ; funding course : 2006-2008.

·           Research Agreement no.3128/2003 – the The Technical Analysis of the present situation of the heat flow distribution system on RA LOTUS,Beneficiary: RA LOTUS, Manager of the project: Dr.eng. Mihai Demian.

·           Research Agreement no.46C/2003 –The Technical and Economic Analysis of the heating point  up-grade, Beneficiary: The Drobeta Turnu Severin City Hall, Manager of the project: Dr.eng. Mihai Demian.

 

 

International research activity

 

1.         Program code RO 2002/000 - 586.05.02.02.160, beneficiry Agency for Development of South-West Oltenia region, Phare 2002 Program / Human resources development; title:Improvment and antrepreneurial development in technics field; funding: 63.700 Euro;

 

 

 

Publications

 

1.         M. Demian , G. Demian, L. Grecu Investigation with ultrasonic waves to determine metallic materials properties, (ISI proceedings), Proceedings of the 1st WSEAS International Conference Materials Science 2008, ISSN 1790-2769; ISBN 978-960-474-024-61.

2. G. Demian, M. Demian, L. Grecu, V. Grecu: Tribological testing on the steel hardening with laser; International Symposium Friction, Wear and Wear Protection; Aachen, 9-11 Apr 2008.

3.         M. Demian G. Demian; L. Grecu;  Investigation with ultrasonic waves to determine metallic materials properties; 1st WSEAS International Conference on
MATERIALS SCIENCE (MATERIALS'08) The Proceedings are covered by ISI proceedings, 2008.

4.         L. Grecu;  G. Demian; M. Demian; S. Savu: Studiul energetic si evaluarea câmpului termic la suprafata suportului din aliaj de titan la încarcarea cu fascicul de electroni – Simpozionul international – Ingineria Suprafetelor 4-5 sept 2008.

5.         M Demian; L Grecu; G. Demian: Modelarea procesului termic la sudarea cu fascicule concentrate de energie a otelurilor aliate, rezistente la uzura, Conferinta ASR Sudura 2008 „Noutăţi în domeniul materialelor, echipamentelor şi proceselor de sudare”, 17-19 septembrie 2008 Buzău.

6.         Luminita Grecu, Gabriela Demian, Mihai Demian, Different Kinds of Boundary Elements for Solving the Problem of the Compressible Fluid Flow around Bodies-a Comparison Study, The 2008 International Conference of Applied and Engineering Mathematics, London, 2-4 July, 2008.

7.         Grecu Luminiţa, Demian Gabriela, Demian Mihai, A Mathematical Approach of the temperature Field in case of Electron Beam Welding, The 19th International DAAAM Symposium ”Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions”, 22-25th October 2008

8.         Grecu Luminiţa, Demian Gabriela, Demian Mihai, Modelarea proceselor termice la sudarea cu fascicul de electroni a oţelurilor aliate, Conferinta Internationala, Tehnologii innovative de imbinare a materialelor avansate, 12-13 iunie 2008, Timisoara.

9.         Grecu Luminiţa, Demian Gabriela, Demian Mihai, Two boundary element approaches for the compressible fluid flow  around a non-lifting body, UPB Sci Bull.

10.M. Trusculescu, I. Padurean Gabriela Demian,  Influence of structural state on cavitational erosion of GX4CrNi13-4 stainless steel,  Scientific Bulletin of the „Politehnica „ University of Timisoara Transaction on Mechanics pag 1-7, 2007.

11.Padurean I. Demian Gabriela, Trusculescu M., Cavitation erosion resistance of the martensitic stainless steel GX4CrNi13-4 laser hardened (In curs de publicare in Revue Roumaine Appliquee, tome 52, no. 1, 2007.

12.Gabriela Demian, Lucia Cazacu, M Demian,  Luminita Grecu, Laser remelting densification of composite layers with harde carbides and matrix nickel, Scientific Bulletin of the „Politehnica „ University of Timisoara Transaction on Mechanics pag 29-33, 2007.

13.Luminita Grecu,  V. Grecu, Gabriela Demian, M. Demian, A mathematical study for choosing the best material when many criteria of different importance are involved, Scientific Bulletin of the „Politehnica „ University of Timisoara Transaction on Mechanics pag 87-93, 2007.

14.Mihai Demian, Gabriela Demian, Luminita Grecu, Valentin Grecu, Method to Determine the Reliability for Thermoelectric Power Station Elements, Proceedings of International Scientific Conference MicroCAD 2007, University of Miskolc pag 35-41, 2007.

15.Luminita Grecu,  V. Grecu, Gabriela Demian, M. Demian, Mathematical models for choosing the best material when many criteria of different importance are involved, Proceedings of International Scientific Conference MicroCAD 2007, University of Miskolc pag 35-41, 2007.

16.Mihai Demian, Gabriela Demian „Journal of non-paraiseworthy”, method to determine the relyiability for thermo-electric power station elements, Review of Industrial Engineering Nr.1, volume 1, Editura Universitaria 2005.

17.Gabriela Demian, Mihai Demian CO₂ Laser Procesing, Proceedings of International Scientific Conference MicroCAD 2005, University of Miskolc pag 19-24, 2005.

18.Gabriela Demian, Savu Danut, Demian Mihai , Study about factor influence at the laser surface hardening, METAL 2005 , Hradec and Moravicí, Cehia, 24.- 26, 2005.

19.Gabriela Demian, Demian Mihai, Savu Danut, Theoretical and experimental investigation to determine the laser process parameter for surface heat treatment, 1^st International conference on heat treatment and surface engineering of tools and dies, Croaţia, 8-11 iunie 2005.

20.Demian Gabriela, Ghermec Olimpia, Savu Danut, Demian Mihai, Experimental evaluation of T6061-T6 (Al- Mg-Si) MIG buttwelds behaviour in salted wet marine atmosphere, 58th Annual Assemblez and international conference of international Institute of welding, Praga, 10-15 iunie, 2005.

21.Savu Danut, Demian Mihai, Demian Gabriela, Ghermec Olimpia. Three- level method for the real signal digital processing in Two-Wires welding through-the-arc seam tracking sensor, 58th Annual Assemblez and international conference of international Institute of welding, Praga, 10-15 iunie, 2005.

22.Gabriela Demian, Mihaela Tacă, Iulian Gutu, Mihai Demian., Efect of laser process parameters on the surface absorbtivity,  Journal: Materials Science Forum Vols 480-481, page 207, 2004.

23.Gabriela Demian, Mihai Demian, Rezistenţa la uzare a oţelului OLC 50 călit cu laser Ecologia Industriala III-IV, 87-95,  2003.

24.Mihai Demian, Gabriela Demian - Program “analizer” pentru prelucrarea datelor experimentale, Zilele Academice Timişene, Materiale avansate, procesare şi caracterizere, ISBN 973-687-127-4, pag 119-123, (2003).

25.Gabriela Demian, Mihai Demian, Study concerning property modification after superficial laser heat treatment –Tratamente termice şi ingineria suprafeţelor –  3 (1-2)  103-106, (2003).

26.Mihai Demian, Gabriela Demian, Vasile Tomita,  Study’s about metallic material structures evolution on the pipes,  Proceedings of International Conference “Research and development in mechanical industry” Radmi 2003  Serbia and Montenegro   1701 -1705, (2003).

27.Mihai Demian, Gabriela Demian, Vasile Tomita  Study of structural evolution at the pipes from super heater,  Proceedings of International Scientific Conference MicroCAD 2003, University of Miskolc,  63-67, (2003).

28.Vasile Tomiţă, Gabriela Demian, Mihai Demian, Electromagnetic Dynamical Systems, Proceedings of International Scientific Conference microCAD 2003, University of Miskolc, 71-75 (2003).

29.Vasile Tomiţă , Mihai Demian, Gabriela Demian, Hellinger integrals for vector function, Proceedings of International Scientific Conference microCAD 2003, University of Miskolc, 43-49 (2003).

30.Gabriela Demian, Mihaela Tacă, Iulian Gutu, Mihai Demian., Laser produced functionally gradient clad on Ni base alloys, Proceedings of First International Meeting on Applied Physics (APHYS-2003) October 13-18th Badajoz,Spain, American Institute of Physics "Recent Advances in Interdisciplinary Applied Physics" (2003).

31. Gabriela Demian, Mihai Demian Study about factor influence at the laser surface hardening, Physics International Conference TIM, Physics A. U. T. (2003)

32.Gabriela Demian,  Modificări structurale şi de duritate la durificarea cu laser a oţelului OLC 50. Proceedings of International Conference: Examination Methods For Welded Structure Components, ISIM, Timişoara  134-141, (2003).

33.Gabriela Demian, Mihai Demian, Theoretical and experimental study of the heat treatment of steel surface using CO2 laser,  U. P. B. Sci. Bull. Series A, Vol16, Nr 76-82, 2002.

34.Mihai Demian, Gabriela Demian, - Coduri şi standarde pentru examinarea cu radiaţii penetrante. Analiza comparativa. Conferinţa   Internaţionala   ,,Rezistenta   îmbinărilor    sudate"   -  ISIM    Timişoara, 6-7 noiembrie (2002).

35.Mihai Demian, Gabriela Demian, - Analizele şi Încercările îmbinărilor sudate la un recipient de presiune  de 73m3 . Conferinţa   Internaţionala   "Rezistenta   îmbinărilor   sudate"   -   ISIM   Timişoara, 6-7 noiembrie (2002).

36.Gabriela Demian, Mihai Demian, Criterii de alegere a materialului primar privind amorfizarea cu ajutorul energiilor concentrate. Proceedings of International Conference, "Universitaria ROPET 2002". Petroşani 189- 192. (2002)

37.Mihai Demian, Gabriela Demian, The influence of the heat treatment applied to the steel nondestructive testing, Proceedings of International Conference Research and development in mechanical industry RaDMI 2002, Vrnjačka Banja, Yugoslavia 142-146, (2002).

38. Daniela Dolha Gabriela Demian, About the critical size of a spherical seed in the crystallization process, Sesiunea de comunicări ştiinţifice Oradea 124-132, (2001).

39.Gabriela Demian, Mihai Demian, Studii privind dependenta dintre atenuarea ultrasunetelor şi caracteristicile otelurilor. Proceedings of International Conference ,,Universitaria ROPET 2001". - Petroşani   243-246, (2001).

40.Gabriela Demian, Mihai Demian, Stimularea cu laser in piese a ultrasunetelor şi aplicaţii ale acestora in industria metalurgica. Proceedings of International Conference ,,Universitaria ROPET 2001". -Petroşani  . 97-100. (2001).

41. Gabriela Demian, Mihai Demian, Determinarea conţinutului de austenita reziduala cu ajutorul difracţiei X, Proceedings of International Conference ,,Universitaria ROPET 2001". Petroşani 239- 242. (2001).

42.Vasile Tomiţă , Mihai Demian, Gabriela Demian - Analiza optimizării costului total in cadrul procesului de tehnologic - Sesiunea de comunicări ştiinţifice Universitatea Constantin Radulescu Motru -, 578-582, (2001).

43.Vasile Tomiţă , Mihai Demian, Gabriela Demian - Importanta managementului in procesele tehnologice - Analele Universităţii Gheorghe Anghel nr. 5 – 6,pp 47-52 (2001)

44.Gabriela Demian, Mihai Demian, Activitatea previzionala in domeniul tehnologiei - Analele Universităţii din Craiova – seria Colegiu, 178-182, (2000).

45.Gabriela Demian, Mihai Demian, Vasile Tomita, Normalizarea şi importanta ei in metodologia analizei logice - Revista asociaţiei de logica "LOGOS"-nr. l, 37-42. (1999).

46. Gabriela Demian, Mihai Demian, Vasile Tomita Metode de axiomatizare in analiza logica - Revista asociaţiei de logica "LOGOS"- nr. 3, 26-30. (2000).

47. Gabriela Demian, Mihai Demian, Vasile Tomita Unele consideraţii asupra logicilor neclasice, Revista asociaţiei de logica "LOGOS Revista nr. 4, 14-22, (2000).

48. Vasile Tomiţă , Mihai Demian, Gabriela Demian - Metode de previziune tehnologica - Sesiunea de comunicări ştiinţifice Universitatea Constantin Radulescu Motru , . 576- 580 (2000)

49.Mihai Demian, Gabriela Demian - Modalităţi de optimizare a proceselor tehnologice - Simpozion Universitatea Hercules Băile Herculane 142-146. (2000)

50.Gabriela Demian, Mihai Demian,, Determinarea   sensibilităţii   otelului   la  fragilizare  prin hidrogen  utilizând  metoda microscopica - Metoda  Sumitomo -Analele Universităţii din Craiova-seria Colegiu nr. 1,  82 – 88. (1999)

51.Gabriela Demian, Mihai Demian, Lumina neagra in examinarea nedistructiva - Analele Universităţii din Craiova-seria Colegiu nr. 1, 76-80. (1999).

 

Books

 

Demian Mihai, Demian Gabriela Lab Guide –“Nondestructive testings” – 1996

Demian Mihai, Demian Gabriela-Lab Guide –“Defectology” 1996

Bică M., Călbureanu M., Cernăianu C., Gabriela Demian-–“Heat Transfer Flow” Editura ICMET, Craiova 2003.

Demian Gabriela, Laser material procesing - Editura Universitaria , Craiova, 2005.

Ghermec Olimpia, Demian Gabriela, Lab Guide  Ecopedology - 2007

Demian Gabriela, Ghermec Olimpia, Ciobanu Mariana, Bucse Gabriela, Nicolicescu Claudiu, Physics , Lab Guide -2007

  

Society Membership, Honors and Awards

 

- In 2004 I received the Doctor degree title from the Bucuresti Technical University with „CUM LAUDE” distinction I

2005, member of the Romanian Welding Association, Timisoara, Romania

2005- member of the Romanian Engineering General Association

2000, member of the Romanian Association of Tensometry, ARTENS Filial, Drobeta Turnu Severin, Romania

1994 - “ORGANON” Logycal Association-founder member

Other Professional Activities

- summer schools, workshops

   Sept. 23-25, 2004:  Workshop  „Qualifications Agreement within the European educational process of navigation QUEENAV 2004”, Drobeta Turnu Severin, România; organizers: Faculty of Engineering and management of Technological Systems from Drobeta Turnu Severin, Romanian naval Authority, Romanian Ministry of Transportation (member of the organizing committee);

 - 13-20 July 2008 - Politehnica din Milano I^st International School on Laser-surface interactions for new materials production: tailoring structure and properties (Venice, 13-20 July 2008).